An innovative method for human height estimation combining video images and 3D laser scanning

Digitalization has increased the number of video surveillance systems that sometimes capture crime images. Traditional methods of human height estimation use projective geometry. However, sometimes they cannot be used because the video camera surveillance system is not available or has been moved and there are no reference lines on the frame. Scientific studies have developed a new method for human height estimation using 3D laser scanning. This model necessarily requires a series of approximations, which increase the final measurement error. To overcome this problem, in the present study, images of a subject are projected directly on the 3D model, estimating the height of the subject. This article describes the methodological approach adopted through the analysis of a real case study in a controlled environment executed by Carabinieri Forensic Investigation Department (Italy). The aim is to obtain a human anthropometric measure derived from frames extracted from the videos associated with the digital survey of the framed area obtained with 3D laser scanning and point cloud analysis. The result is the height estimation of five subjects filmed by a camera obtained through the combination of 2D images extracted by a DVR/surveillance systems with 3D laser scanning. Results show that most estimated measurements are less than the real measurement of the subject; it also depends on the posture of the subject while walking. Furthermore, results shows the differences between the real height and the estimated height with a statistical approach.     

An Exploratory Framework for Community-Led Research to Address Intimate Partner Violence: a Case Study of the Survivor-Centered Advocacy Project

This case study discusses the Survivor-Centered Advocacy (SCA) Project, a community-based participatory research (CBPR) project that convened anti-violence advocates from culturally specific communities to design and implement research. The project used a unique approach to build grassroots research capacity and center survivors of intimate partner violence from historically marginalized communities. This approach coalesced into the creation of an exploratory Community-Led Research (CLR) framework that incorporated trauma-informed, research justice and language justice principles. The CLR framework responded to community members’ desire to lead, rather than simply participate in, the research process. As a result, five studies were designed and executed by practitioners turned community-based researchers, most of whom had never before engaged in research, except as subjects. The CLR framework integrated the skills and experiences of community-based and external researchers, and led to high levels of engagement, rich data, more equitable research processes and innovative research projects.     

False-negative probability in the SEM/EDS automated discovery of iGSR particles: A Bayesian approach

The automated search software integrated with a scanning electron microscope (SEM/EDS) has been the standard tool for detecting inorganic gunshot residues (iGSR) for several decades. The detection of these particles depends on various factors such as collection, preservation, contamination with organic matter, and the method for sample analysis. This article focuses on the influence of equipment resolution setup on the backscattered electron images of the sample. The pixel size of these images plays a crucial role in determining the detectability of iGSR particles, especially those with sizes close to the pixel size. In this study, we calculated the probability of missing all characteristic iGSR particles in a sample using an SEM/EDS automated search and how it depends on the image pixel resolution setup. We developed and validated an iGSR particle detection model that links particle size with equipment registers and applied it to 320 samples analyzed by a forensic science laboratory. Our results show that the probability of missing all characteristic iGSR particles due to their size is below 5% for pixel sizes below 0.32 μm². These findings indicate that pixel sizes as large as twice the one commonly used in laboratory casework, that is, 0.16 μm², are effective for initial sample scanning, yielding good detection rates of characteristic particles that could exponentially reduce laboratory workload.     

Breaking point? An analysis of fatal stab wounds to the torso in Ireland between 2011 and 2018, examining the extent of rib fractures

This study examines the pattern of rib injuries occurring in cases of fatal torso stab wounds in Ireland between 2011 and 2018. It has been suggested by previous studies that rib fractures are not commonly sustained in stab wounds to the torso. We wanted to ascertain whether this was the case, as our data suggested that rib fractures were frequent, and where a rib is fractured there is a higher chance of organ injury and death, making this an important area of study. One hundred and forty seven cases of fatal stab wounds from an eight-year period were retrospectively reviewed. Fatal stab wounds to other body areas, were excluded; leaving a total of 104 cases with stab wounds to the torso. We found that 69.2% of cases had rib injuries, a figure significantly higher than previously reported. Our data suggests that stab wounds to the torso often fracture ribs, putting the underlying organs at increased risk of injury and perhaps contributing to fatality. The amount of force needed to cause a rib fracture can be difficult to quantify and indeed from the high percentage of rib fractures sustained in our data it appears that the ribs may be fractured regardless of the amount of force used; this is borne out by the finding that self-inflicted injuries also caused rib fractures. Our study shows that other factors, such as anatomical positioning and wound depth may have a greater bearing than force in terms of whether a rib fracture is sustained.     

The systemic error in the vertical component of handgun bullet trajectory reconstructions

Establishing the path or trajectory of a fired bullet is an often recurring part of shooting incident reconstruction. The current study describes how gravitational pull causes a systemic error on the vertical component of a trajectory reconstruction. Bullet drop, drop angle, and vertical offset are explained and calculated for 10 different handgun/ammunition combinations over a range of distances up to 100 m. The presented results are intended to provide forensic firearm examiners with a reference frame for the magnitude of error introduced on handgun bullet trajectory reconstructions over distance. Threshold values of 20 and 30 m are proposed as conservative distances up to where bullet trajectories can be modeled as straight lines with subsonic/transonic handgun bullets and with supersonic handgun bullets respectively. Both the bullet drop and vertical offset will be below 5 cm at these distances for those categories. The drop angle will be below 0.3°.     

Individuals lacking ridge detail: A case study in adermatoglyphia

Adermatoglyphia is a very rare autosomal‐dominant condition that is genetically inherited and causes an individual to be born without conventional ridge detail on either their palmar or plantar surfaces (the fingers and palms of the hands and the toes and the soles of the feet). While adermatoglyphia has been the focus of medical and genetic research, no previous research has been conducted with regard to the forensic recovery and identification of marks from an adermatoglyphic individual. By observation of ridge detail donated by an adermatoglyphic subject, the study uses different methods in order to capture fingermarks (methods include: inked capture, livescan (biometric) capture, cyanoacrylate fuming, ninhydrin enhancement, and physical developer). Unusually, the purpose of this paper ends up presenting a number of examples of an absence of evidence; unsuccessful attempts made to capture and enhance fingerprint ridge detail. This is determined over a range of standard means including "live" donations by the adermatoglyphic subject onto the Livescan system, and enhancements of latent donations. The subject shows to leave either insubstantial fingermarks with no detail, or no mark whatsoever.     

Cuticular hydrocarbons as a tool for determining the age of Chrysomya rufifacies (Diptera: Calliphoridae) larvae

Calliphoridae are one of the most important insect groups encountered as evidence collected from a crime scene. Age determination of the immature stages of these necrophagous flies is an important step toward estimating the time of colonization and inferring a minimum postmortem interval (PMI_min) in most instances. To determine if the cuticular hydrocarbons could be used to establish whether the development stages yield characteristics profiles, allowing for age estimation, hydrocarbons were extracted from 1st and 2nd, as well as feeding and post‐feeding 3rd instar Chrysomya rufifacies, the hairy maggot blow fly. Extracted hydrocarbons were analyzed using gas chromatography coupled to mass spectrometry with the aim to investigate the changes in chemical profiles of each larval stage. A total of 23 compounds were identified with most of them being alkanes (65%) with carbon chain lengths of 9–33 carbons, alkenes (18%), and methyl‐branched alkanes (17%). All the hydrocarbons except pentadecane (C15), hexadecane (C16), and nonacosane (C29) showed significant differences in their expression throughout larval development. For 1st instars, nonane was the most abundant (17% of the total hydrocarbons content) compound. Accounting for 11% and 10% of the cuticular hydrocarbons, tricosane and pentacosane, respectively, were the notable hydrocarbons in 2nd instars. For post‐feeding 3rd instars, hentriacontane and tritriacontane were present with relative abundances 18% and 15%, respectively. On average, there was a shift from low to high molecular weight hydrocarbons as the larvae aged. These results indicate the change in hydrocarbons makeup as larvae age and could potentially be used to determine the age of immature C. rufifacies and hence aid in PMI_min estimations. However, future research is needed to validate these results under natural conditions in the field.     

Research on the local regional similarity of automatic fingerprint identification system fingerprints based on close non-matches in a ten million people database—Taking the central region of whorl as an example

The local regional similarity of fingerprints has always been a hot issue in the field of fingerprint research. With the increasing size of ten-print databases, the appearance of close non-matches (CNMs) in automatic fingerprint identification system (AFIS) candidate lists has attracted increasing attention from forensic science departments worldwide. In this study, three categories (high-, medium-, and low-level) of standards for CNMs were established and 60 whorl samples were marked with different numbers of minutiae to explore the occurrence and influencing factors of CNMs in AFIS candidate lists based on a ten million people database. The results showed that all prints could be found with their corresponding CNMs. The average occurrence rate of CNMs for every query was 52.7% in the top 100 lists, and the most similar CNM was exactly the same in the local area of 12 coincidence points. CNMs appeared more in the middle and lower parts of the central region of the whorl. Moreover, shorter C2C distances and the same finger number and hand led to more CNMs being inspected. CNMs with higher similarity required a more extensive regional area and smaller minutiae density. We concluded that CNMs have a high occurrence rate in large-scale databases and many factors are closely related to them. Fingerprint examiners and researchers need to strengthen their understanding of CNMs to avoid the occurrence of misidentification like the Madrid bombings.     

Heat and let dye: Part II – Rapid heat-fixing of blood traces

Blood-contaminated shoeprints and footmarks contain valuable operational information as they may bind an individual who stepped in the crime scene with the incident and not merely with the location. As determining the age of a bloodstain remains a challenge, while processing the scene, it is difficult to determine whether the blood is completely, or partially, dry. Thus, executing a dye staining protocol may wash these marks away as they might still be soluble. However, to meet this challenge, it is possible to fix blood marks using heat. This study aims to find a solution for floor surfaces covered by heavier blood traces (shoeprints and footmarks). For this purpose, a new pseudo-operating device was constructed for examining the blood-fixing process of both mentioned trace types. Two trials were performed with depletion marks. The results revealed that fully developed fresh and heavily blood deposits were obtained by heating to 200°C for 7.5 min using the fixing device, followed by a staining protocol using amido black solution. The achieved sharp resolution of the examined bloody prints demonstrates that in certain cases the dehydration mechanism of heating is preferred over precipitating the proteins attributed to 5-sulfosalycilic acid; thus, reducing the risk of washing blood evidence while processing the crime scene.